Adding a touchscreen monitor

[swreid]

I have added a touchscreen monitor to my sim setup but now I find that the monitor does not work as a touchscreen running with an iPad Pro 11". It seems my only solution is to buy an Android tablet that will allow my monitor to be a touchscreen monitor. Any suggestions that will solve my problem? I will only use this device to run Air Manager, with Knobster, and using a MacBook Air with M2 chip to run X-plane 11. I guess the point is it doesn't have to be the best alternative! The cheapest, that does the job, will be just fine. Thanks
Stu

[Crunchmeister]

You gave very little detail about your existing setup, so it's hard to say what your issue may be.

Before you run off buying new stuff - if you're running on Windows, run the Touch Screen Calibration tool so that Windows correctly recognizes the new touch screen as such. THat's typically required when adding a new touch monitor to a Windows system that doesn't have the touch screen as the default / only monitor.

[jph]

Best thing to do BEFORE posting is at least try a search as depending on your setup your may find the answer.
A quick search simply on 'touch screen' on the forums here -

https://siminnovations.com/forums/viewt ... uch+screen

There are others, and as the other poster mentioned you do not indicate what system you are using so it is extremely difficult to give specific help.

[KristinaReeves]

I think maybe he's talking about splitting the touch screen in half to use 2 apps running at the same time, but maybe his device has a problem and can't do it. Sorry if I made a mistake

[jph]

I think maybe he's talking about splitting the touch screen in half to use 2 apps running at the same time, but maybe his device has a problem and can't do it. Sorry if I made a mistake

I think from the first post it is virtually impossible to deduce WHAT is being used and what the desired end results are. Extremely confusing.